点击图片查看原图
How is GRGT uniquely qualified to meet your airborne equipment testing requirements?
Full service laboratories in Maryland,California and Texas
Secure facilities
Highly-trained personnel
One-stop-shop for EMC&Environmental Simulation requirements
Reverberation Chamber for HIRF over 20,000 V/m
45kVA fully programmable power supply with Section 16 Power Input plus Boeing and Airbus specific test software.DC through over 1000Hz output frequency.1/3-phase output
20kVA variable power supply,400Hz,1/3-phase output
Three RF anechoic EMC chambers with 1/3-phase 400Hz RF power filters with Power Factor Correction Coils(PFCCs)and RF filtered DC power
Up to 150VAC line to ground,3-phase,400Hz,100A per phase,RF filtered power
Up to 277VAC line to ground,3-phase,400Hz,50A per phase,RF filtered power
Acceleration Testing Capabilities up to 40 Gs
GRGT Labs is NVLAP-or A2LA-accredited to perform RTCA/DO160 Commercial Aircraft Product testing to RTCA/DO-160D(1997),RTCA/DO-160E(2005)&RTCA/DO-160F(2007).
RTCA/DO-160 Environmental Conditions and Test Procedures for Airborne Equipment
Section 4–Temperature and Altitude
Section 5–Temperature Variation
Section 6–Humidity
Section 7–Operational Shocks and Crash Safety
Section 8–Vibration
Section 9–Explosion Proofness
Section 10–Water Proofness
Section 11–Fluids Susceptibility
Section 12–Sand and Dust
Section 13–Fungus Resistance
Section 14–Salt Spray
Section 15–Magnetic Effect
Section 16–Power Input
Section 17–Voltage Spike
Section 18–Audio Frequency Conducted Susceptibility–Power Inputs
Section 19–Induced Signal Susceptibility
Section 20–Radio Frequency Susceptibility(Radiated and Conducted)
Section 22–Lightning Induced Transient Susceptibility
Section 24–Icing
Section 25–Electrostatic Discharge(ESD)
GRGT also tests to proprietary aircraft manufacturer standards:
Airbus:ABD0100.1.2 Environmental Conditions and Tests Requirements Associated to Qualification
Airbus:ABD0100.1.8.1 Electrical and Installation Requirements
Boeing:787B3-0147 Electrical Power Quality and Design Requirements document
Boeing:D6-16050-5 Requirements for Electromagnetic Interference Control
HIRF Testing(High Intensity Radiated Fields)
High Intensity Radiated Fields(HIRF)testing is a form of EMC testing applicable to equipment that is subject to extreme electromagnetic environments or critical equipment whose failure would be hazardous to human safety.
HIRF requirements are applied to ensure that the aircraft electrical and electronic systems are able to continue safe operation without failure.
HIRF specifications that GRGT performs:
FAA HIRF Rule&Advisory Circular 20-158
RTCA/DO-160E/F/G
Boeing Requirements
Airbus Requirements
Contacts:Michael Lee
E-mail:zhanghp grgtest.com
Tel:+86 18620908348
WeChat:18620908348
RTCA/DO 160G Testing
网址：http://www.keqiw.cn/shangwufuwuwang/134230.html
