FT-100系列振实密度测试仪

 FT-100系列振实密度测试仪 

FT-100 Series Tap density tester

1. 概述：Overview

具有设定振次和时间两种测量方式，设计符合人体工学，操作简单.符合USP（美国药典）、BP （英国药典）和EP（欧洲药典）的规范要求及GB/T5162-2006/ISO3953:1993（金属粉末 振实密度的测定），仪器含盖国标GB/T 5162-2006/ISO3953:1993中的各项指标。

With set vibration times and time two measurement methods, The design accord with human body engineering, the operation is simple. Meet specification requirements of USP (the United States pharmacopoeia), BP (British pharmacopoeia) and EP (European pharmacopoeia) and GB/T 5162-5162 / ISO3953:1993 (metal powder the determination  of tap density), This instrument covers all the indexes in national standard GB/T 5162-2006 / ISO3953:1993  

适用于非金属粉、金属粉体、制药、化工、电池、磨料以及科研教学等领域，是粉体行业振实密度测试的理想仪器。

It is suitable for non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and research teaching etc field , which is an ideal instrument for the tap density testing of powder industry

三、   工作原理： Working principle

将粉末量筒固定在机械振动装置上，振动电机带动机械振动装置上下振动，装有粉末的刻度量筒随机械振动装置而发生有节拍的振动，随着振动次数的增加，量筒里的粉末逐渐振实，振动次数达到设定的次数后，机械振动装置停止振动，读出刻度试管的体积，根据密度的定义：质量除以体积、从而求出振实后的粉末密度。

Powder cylinder fixed in the mechanical vibration device, mechanical vibration device vibrate under  driven by vibrating motor, the calibration test tubes which containing powder  vibrate  with the mechanical vibration device, with the increase of vibration frequency, the powder in the measuring cylinder gradually compact by vibration,  When vibration frequency reaching  setting the number of times, mechanical vibration device will  stop the vibration, Read the volume of the calibration test tube, according to the definition of density: mass divided by volume, thus find out the powder density after compaction.

2. 各型号及参数描述model and parameter description

功能项目/型号 project/model	FZS4-4		FT-100B	FT-100A	FT-100CA
3. 测试工位数 Test station number	1个 one				2个 two
4. 测试数据处理方式 Test data processing method	人工计算 manual computation			带打印+自动计算 With print + automatic calculation
5. 量筒配置规格 Measuring cylinder specifications	25ml、100ml	25ml、50ml、100ml、250ml
6. 密度density	0-9.9999g/cm3
7. 测量模式measurement	振次和时间两种测量方式 Vibration and time measurements
8. 振幅 range of vibration	最大14mm，整数1-14mm可调； Maximum 14mm, integer 1-14mm adjustable;
9. 振动频率 vibrational frequency	0～300 次/分（连续可调）times/ minute. (continuous adjustable)
10.振动时间 time of vibration	0-9999S
11.符合标准 meet the standards	USP（美国药典）、BP （英国药典）和EP（欧洲药典）的规范；GB/T 5162-2006/ISO3953:1993（金属粉末 振实密度的测定） USP (us pharmacopoeia), BP (British pharmacopoeia) and EP (European pharmacopoeia);GB/T 5162-2006 / ISO3953:1993 (metal powder  measuring the tap density  )
12.量筒要求 Measuring cylinder requirements	容积Volume 100±1.0ml，刻度部分高H 175±10mm 最小刻度间的容积为1ml, volume of the minimum scale is 1ml 容积为Volume 25±0.5ml刻度部分高H 135±7mm。 最小刻度间容积为0.2cm，测量精度为±0.1cm The volume of the minimum scale is 0.2 cm and the measurement accuracy ±0.1cm
11．重复性repeatability	误差Deviation：≤1%
·         12.准确性Accuracy	误差Deviation：≤1%
13.适用范围 ·         Scope of application	非金属粉、金属粉 、制药、化工、电池、磨料以及科研教学等粉体颗粒物料 Non-metallic powder, metal powder, pharmaceutical, chemical, battery, abrasive and scientific research teaching and other powder particle materials
14.电源Power supply	交流Ac 220V(50Hz/60Hz)、40W
15.使用环境 ·         Operational environment	湿度小于85%，无凝结现象，无烟尘，无机械振动源或电磁干扰源 Humidity is less than 85%, no condensation, no smoke, no mechanical vibration source or electromagnetic interference source
16.选购项目 Buy items	a.2Q验证文件  b.隔音箱   c.水分仪   d.粉体真密度仪  e.松装密度仪 a.2Q verification file    b. sound box   c. moisture meter        d. powder true density meter        e. bulk density meter

FT-100系列振实密度测试仪
网址：http://www.keqiw.cn/qitafenxiyiqi/40834.html

特别提示：本站信息由用户自行发布，真实性未经证实，仅供参考，客齐网不承担任何责任。